Instruction Manual

Network Storage Controller Status
• Transfer/Sec—The average number of transfers (reads and writes) on this network storage controller
each second
• MBytes/Sec—The average number of megabytes transferred on this network storage controller each
second
• Millisec/Transfer—The average time to complete a transfer to and from the selected network storage
controller
• Queue Length—The average number of transfer requests (reads and writes) waiting to be serviced by
the network storage controller
• Port Utilization%—The average utilization of the Fibre Channel port on this controller Network Storage
Controller Inventory
Network Storage Controller Inventory
Controller Configuration
• The controller identification, including controller model
• The supported and negotiated PCI protocols (bus speed)
Network storage array
The following information is provided for a network storage array.
Network Storage Array Status
• Server Transfers/Sec—The average number of transfer requests (read and written) between the monitored
servers and the array each second
• Server MBytes/Sec—The average number of megabytes transferred (read and written) between the
monitored servers and this array each second
• Server Millisec/Transfer—The average time for each request between the monitored servers and the
array to complete
• Server Queue Length—The average number of transfer requests (read and written) from the monitored
servers that are waiting to be serviced by this array
• Array MBytes/Sec—The average number of megabytes transferred (read and written) to all the disks
in the array each second
• Disk Queue Length—The average number of transfer requests (read and written) waiting to be serviced
by each disk in the array
Network Storage Array Inventory
• Array Configuration—Displays the number of logical drives implemented on the array
• Hard Drives—Lists the drives that constitute the array
Network storage logical drives
The following information is provided for logical drives located in the network storage.
Network Share Status
• Reads/Sec—The average number of reads from the selected logical drive each second
• Writes/Sec—The average number of writes to the selected logical drive each second
• Read MBytes/Sec—The average number of megabytes read from the selected logical drive each second
• Write MBytes/Sec—The average number of megabytes written to the selected logical drive each second
• Millisec/Read—The average time required to complete a read operation
• Millisec/Write—The average time required to complete a write operation
• Queue Length—The average number of transfer requests (reads and writes) that are waiting to be
serviced by the logical drive
64 Measurement parameter matrix