User guide
Table Of Contents
- HP Insight Cluster Management Utility v7.2
- Contents
- 1 Overview
- 2 Installing and upgrading HP Insight CMU
- 2.1 Installing HP Insight CMU
- 2.1.1 Management node hardware requirements
- 2.1.2 Disk space requirements
- 2.1.3 Support for non-HP servers
- 2.1.4 Planning for compute node installation
- 2.1.5 Firmware upgrade requirements
- 2.1.6 Configuring the local smart array card
- 2.1.7 Configuring the management cards
- 2.1.8 Configuring the BIOS
- 2.2 Preparing for installation
- 2.3 Installation procedures
- 2.4 Installing HP Insight CMU with high availability
- 2.5 Upgrading HP Insight CMU
- 2.5.1 Upgrading to v7.2 important information
- 2.5.2 Dependencies
- 2.5.3 Stopping the HP Insight CMU service
- 2.5.4 Upgrading Java Runtime Environment
- 2.5.5 Removing the previous HP Insight CMU package
- 2.5.6 Installing the HP Insight CMU v7.2 package
- 2.5.7 Installing your HP Insight CMU license
- 2.5.8 Restoring the previous HP Insight CMU configuration
- 2.5.9 Configuring the updated UP Insight CMU
- 2.5.10 Starting HP Insight CMU
- 2.5.11 Deploying the monitoring client
- 2.6 Saving the HP Insight CMU database
- 2.7 Restoring the HP Insight CMU database
- 2.1 Installing HP Insight CMU
- 3 Launching the HP Insight CMU GUI
- 4 Defining a cluster with HP Insight CMU
- 5 Provisioning a cluster with HP Insight CMU
- 5.1 Logical group management
- 5.2 Autoinstall
- 5.3 Backing up
- 5.4 Cloning
- 5.5 Node static info
- 5.6 Rescan MAC
- 5.7 HP Insight CMU image editor
- 5.8 HP Insight CMU diskless environments
- 5.8.1 Overview
- 5.8.2 The system-config-netboot diskless method
- 5.8.2.1 Operating systems supported
- 5.8.2.2 Installing the operating system on the management node and the golden node
- 5.8.2.3 Modifying the TFTP server configuration
- 5.8.2.4 Populating the HP Insight CMU database
- 5.8.2.5 Creating a diskless image
- 5.8.2.6 Creating a diskless logical group
- 5.8.2.7 Adding nodes into the logical group
- 5.8.2.8 Booting the compute nodes
- 5.8.2.9 Understanding the structure of a diskless image
- 5.8.2.10 Customizing your diskless image
- 5.8.2.11 Best practices for diskless clusters
- 5.8.3 The HP Insight CMU oneSIS diskless method
- 5.8.3.1 Operating systems supported
- 5.8.3.2 Enabling oneSIS support
- 5.8.3.3 Preparing the HP Insight CMU management node
- 5.8.3.4 Preparing the golden node
- 5.8.3.5 Capturing and customizing a oneSIS diskless image
- 5.8.3.6 Manage the writeable memory usage by the oneSIS diskless clients
- 5.8.3.7 Adding nodes and booting the diskless compute nodes
- 5.8.4 Scaling out an HP Insight CMU diskless solution with multiple NFS servers
- 6 Monitoring a cluster with HP Insight CMU
- 6.1 Installing the HP Insight CMU monitoring client
- 6.2 Deploying the monitoring client
- 6.3 Monitoring the cluster
- 6.4 Stopping HP Insight CMU monitoring
- 6.5 Customizing HP Insight CMU monitoring, alerting, and reactions
- 6.5.1 Action and alert files
- 6.5.2 Actions
- 6.5.3 Alerts
- 6.5.4 Alert reactions
- 6.5.5 Modifying the sensors, alerts, and alert reactions monitored by HP Insight CMU
- 6.5.6 Using collectl for gathering monitoring data
- 6.5.7 Monitoring GPUs and coprocessors
- 6.5.8 Monitoring HP Insight CMU alerts in HP Systems Insight Manager
- 6.5.9 Extended metric support
- 7 Managing a cluster with HP Insight CMU
- 7.1 Unprivileged user menu
- 7.2 Administrator menu
- 7.3 SSH connection
- 7.4 Management card connection
- 7.5 Virtual serial port connection
- 7.6 Shutdown
- 7.7 Power off
- 7.8 Boot
- 7.9 Reboot
- 7.10 Change UID LED status
- 7.11 Multiple windows broadcast
- 7.12 Single window pdsh
- 7.13 Parallel distributed copy (pdcp)
- 7.14 User group management
- 7.15 HP Insight firmware management
- 7.16 Customizing the GUI menu
- 7.17 HP Insight CMU CLI
- 8 Advanced topics
- 9 Support and other resources
- A Troubleshooting
- HP Insight CMU manpages
- cmu_boot(8)
- cmu_show_nodes(8)
- cmu_show_logical_groups(8)
- cmu_show_network_entities(8)
- cmu_show_user_groups(8)
- cmu_show_archived_user_groups(8)
- cmu_add_node(8)
- cmu_add_network_entity(8)
- cmu_add_logical_group(8)
- cmu_add_to_logical_group_candidates(8)
- cmu_add_user_group(8)
- cmu_add_to_user_group(8)
- cmu_change_active_logical_group(8)
- cmu_change_network_entity(8)
- cmu_del_from_logical_group_candidates(8)
- cmu_del_from_network_entity(8)
- cmu_del_archived_user_groups(8)
- cmu_del_from_user_group(8)
- cmu_del_logical_group(8)
- cmu_del_network_entity(8)
- cmu_del_node(8)
- cmu_del_snapshots(8)
- cmu_del_user_group(8)
- cmu_console(8)
- cmu_power(8)
- cmu_custom_run(8)
- cmu_clone(8)
- cmu_backup(8)
- cmu_scan_macs(8)
- cmu_rescan_mac(8)
- cmu_mod_node(8)
- cmu_monstat(8)
- cmu_image_open(8)
- cmu_image_commit(8)
- cmu_config_nvidia(8)
- cmu_config_amd(8)
- cmu_config_intel(8)
- cmu_mgt_config(8)
- cmu_firmware_mgmt(8)
- cmu_monitoring_dump(8)
- cmu_rename_archived_user_group(8)
- Glossary
- Index
2.5.2.3 Java version dependency
HP Insight CMU v7.2 depends on Oracle Java version 1.6 update 33 or later. HP strongly
recommends upgrading the Java JVMs on both the management node and the endstations running
the GUI to version 1.6u33 or later to avoid security problems with the remote file browser (used
by the cmu_pdcp and autoinstall GUI dialogs).
2.5.2.4 Monitoring clients
Upgrading the management node to HP Insight CMU v7.2 also requires upgrading the monitoring
clients to v7.2 on the compute nodes. Monitoring will fail with an HP Insight CMU v7.2 management
node and v7.0 or previous compute node clients.
2.5.3 Stopping the HP Insight CMU service
To stop the HP Insight CMU service on the management node:
# /etc/init.d/cmu stop
2.5.4 Upgrading Java Runtime Environment
If you are upgrading from HP Insight CMU v5.x or v7.0, Java Runtime Environment V1.6u33 or
later is required for HP Insight CMU v7.2.
2.5.5 Removing the previous HP Insight CMU package
To remove the previous HP Insight CMU package:
# rpm –e cmu
The following message appears:
configuration saved into /opt/cmu/etc/savedConfig/cmuconf##.sav
Save this information. After installation, use this information to restore the previous configuration.
# /opt/cmu/tools/restoreConfig -f /opt/cmu/etc/savedConfig/cmuconf##.sav
2.5.6 Installing the HP Insight CMU v7.2 package
Install HP Insight CMU.
1. Install the HP Insight CMU rpm key:
# rpm --import /mnt/cmuteam-rpm-key.asc
NOTE: If you do not import the cmuteam-rpm-key a warning message similar to the
following is displayed when you install the HP Insight CMU rpm:
warning: REPOSITORY/cmu-v7.2-1.x86_64.rpm: Header V4 DSA/SHA1 Signature, key ID b59742b4: NOKEY
2. Install the HP Insight CMU rpm:
# rpm -ivh REPOSITORY/cmu-v7.2-1.x86_64.rpm
Preparing... ########################################### [100%]
1:cmu ########################################### [100%]
post-installation...
post-installation of x86_64 tree.......done...
detailed log is /opt/cmu/log/cmu_install-Thu_Nov__7_12:21:59_EST_2013
********************************************************************************
* *
* optional next steps: *
* *
* - install additional cmu payload packages (ex: cmu-windows-moonshot-addon) *
* *
* - restore a cluster configuration with /opt/cmu/tools/restoreConfig *
* - complete the cmu management node setup: /opt/cmu/bin/cmu_mgt_config -c *
* - setup CMU HA (more than one mgt node): /opt/cmu/tools/cmu_ha_postinstall *
* *
* after setup is finished, unset audit mode and start cmu : *
* *
* /etc/init.d/cmu unset_audit *
* *
2.5 Upgrading HP Insight CMU 35