User's Guide

Size of boot image is 10240 sectors -> No emulation
Size of boot image is 288504 sectors -> No emulation
6.69% done, estimate finish Mon Nov 15 18:05:23 2004
13.39% done, estimate finish Mon Nov 15 18:05:31 2004
20.07% done, estimate finish Mon Nov 15 18:05:28 2004
26.77% done, estimate finish Mon Nov 15 18:05:27 2004
33.45% done, estimate finish Mon Nov 15 18:05:26 2004
40.15% done, estimate finish Mon Nov 15 18:05:26 2004
46.83% done, estimate finish Mon Nov 15 18:05:26 2004
53.54% done, estimate finish Mon Nov 15 18:05:25 2004
60.21% done, estimate finish Mon Nov 15 18:05:25 2004
66.92% done, estimate finish Mon Nov 15 18:05:25 2004
73.60% done, estimate finish Mon Nov 15 18:05:25 2004
80.30% done, estimate finish Mon Nov 15 18:05:25 2004
86.98% done, estimate finish Mon Nov 15 18:05:25 2004
93.68% done, estimate finish Mon Nov 15 18:05:25 2004
Total translation table size: 2048
Total rock ridge attributes bytes: 0
Total directory bytes: 0
Path table size(bytes): 10
Max brk space used 9000
74736 extents written (145 Mb)
6.
Ensure that there are no mkisofs command errors. Older versions of mkisofs do not accept
the -no-emul-boot option given twice, only accept the use of the –b option once, and
would not accept the -eltorito-alt-boot option at all.
7. Place a LIF directory at the start of the ISO image with the instl_combine command so that
the media will boot:
# /opt/ignite/lbin/instl_combine -C cdfs.out
HP Integrity systems do not require a LIF to be present to boot (PA-RISC systems do), but the
kernel loader used to install Itanium®-based systems does read the installation kernel and file
system from the LIF. Later in the installation process, other files will also be read from the LIF.
For more information regarding how to create custom installation media, refer to the Ignite-UX
Administration Guide.
8. You can now write the ISO image onto a CD. The ISO image created in this example was
written onto the CD using Cdrecord on an Itanium®-based system:
# cdrecord -data -v speed=4 dev=4,0,0 /var/tmp/cdfs.out
It is important to realize that some Windows-based CD writing software cannot create CDs that
will boot on Itanium®-based systems. The CDs produced by some CD writing software may
boot PA-RISC systems, but fail to boot Itanium®-based systems.
This CD, like a tape created by make_boot_tape, allows you to boot a system locally so that it
can contact an Ignite-UX server. In addition, this media is capable of performing a dual-media
recovery. For more information regarding dual-media recovery, refer to the Ignite-UX
Administration Guide.
210