User's Guide

ManualsBrandsHP ManualsSoftwareHP Ignite-UX

151

152

153

154

155

156

157

158

159

160

server="10.0.0.2"

netmask[]="255.255.255.0"

route_gateway[0]="10.0.1.1"

route_destination[0]="default"

disable_dhcp=true

( lla[0/0/0/0] == "080009654321" ) {

ip_addr[0/0/0/0]="10.0.1.45"

}

( lla[2/0/2] == "080009654123" ) {

ip_addr[2/0/2]="10.0.1.46"

}

( lla[1/0/0/0] == "080009654213" ) {

ip_addr[1/0/0/0]="10.0.1.47"

}

...

( lla[0/0/0/0] == "08000A654321" ) {

ip_addr[0/0/0/0]="10.0.2.45"

}

( lla[2/0/2] == "08000A654123" ) {

ip_addr[2/0/2]="10.0.2.46"

}

( lla[1/0/0/0] == "08000A654213" ) {

ip_addr[1/0/0/0]="10.0.2.47"

}

You will want to use unifdef on this file so that you can maintain it in one file but also be able to

create separate files to apply to LIFs (because you want to be able to set IP addresses automatically

on the systems you boot). First, though, you need to insert some other things into the file.

The unifdef command recognizes the following C preprocessor directives:

#ifdef

#ifndef

#if

#else

#endif

With these directives, you can change the configuration file as follows: