User's Guide

Installing HyperFabric
Installing HyperFabric Switches
Chapter 3
53
Installing the HF2 Switch
This section contains information for installing an HF2 switch.
The front of the HF2 switch has a flange—or “wing”—on each side, with two holes for
attaching the switch to the rack. Note that the two figures below do not show the flanges.
Figure 3-2 below shows the front of the HF2 switch with an A6388A HF2 8-port fibre
switch module installed in the switch’s expansion slot.
Figure 3-2 Front of HF2 Switch (A6388A Switch Module Installed)
Figure 3-3 below shows the front of the HF2 switch with an A6389A HF2 4-port copper
switch module installed in the switch’s expansion slot.
Status
Power
A
Ethernet
Port
B
Port
6
Port
7
Port
5
Port
4
Port
3
Port
2
Port
1
Port
0
A6388A HF2 8-port fibre
Integrated 8-port
Integrated Ethernet management
LAN card
fibre card
switch module in
expansion slot
Port
14
Port
15
Port
13
Port
12
Port
11
Port
9
Port
8
Port
10
Main
Ethernet
Port
Aux
Label showing
Ethernet MAC
address
Port LED
colors and
meanings
legend
Status
Status