User's Guide

Troubleshooting HyperFabric
LED Colors and Their Meanings
Chapter 6
128
“Port x ” None Port is not operational.
• A cable is not attached correctly to
the port or no cable is attached at
all.
• The port is connected to a
non-operational adapter in an
HP 9000. (See “Adapter LEDs” on
page 123 or Table 6-2 on page 125
for some tips about a
non-operational adapter.)
• The cable is bad.
• The port is bad. Note that if a port is
bad, and (for some reason) you
cannot use a different port on that
card/switch module, you can replace
the card/switch module. The
integrated 8-port fibre card (in the
middle slot): the card can be safely
removed by qualified
Hewlett-Packard personnel only.
A6388A HF2 8-port fibre or A6389A
HF2 4-port copper switch module in
the expansion slot (the bottom slot):
the switch module can be safely
removed by you or qualified
Hewlett-Packard personnel. First,
try powering the switch off and then
back on.
Solid green Connection from port
to adapter is
operational.
Flashing
green
Data is flowing
between the port and
the adapter.
Data does not start to flow until
HyperFabric initialization has occurred.
Table 6-3 HF2 Switch LED Colors and Meanings (Continued)
LED Color Meaning Notes