Setup and Install

Troubleshooting HyperFabric
LED Colors and Their Meanings
Chapter 5
121
“Port x” None Port is not
operational.
• A cable is not attached
correctly to the port or no
cable is attached at all.
• The port is connected to a
non-operational adapter in
an HP 9000. (See “Adapter
LEDs” on page 111 or
Table 5-2 on page 113 for
some tips about a
non-operational adapter.)
• The cable is bad.
• The port is bad. Note that if
a port is bad, and (for some
reason) you cannot use a
different port on that
card/switch module, you can
replace the card/switch
module. The integrated
8-port fibre card (in the
middle slot): the card can be
safely removed by qualified
Hewlett-Packard personnel
only. A6388A HF2 8-port
fibre or A6389A HF2 4-port
copper switch module in the
expansion slot (the bottom
slot): the switch module can
be safely removed by you or
qualified Hewlett-Packard
personnel. First, try
powering the switch off and
then back on.
Solid green Connection from
port to adapter is
operational.
Flashing
green
Data is flowing
between the port
and the adapter.
Data does not start to flow until
HyperFabric initialization has
occurred.
Table 5-4 HF2 Switch LED Colors and Meanings (Continued)
LED Color Meaning Notes