Setup and Install

Troubleshooting HyperFabric
LED Colors and Their Meanings
Chapter 5
120
Table 5-4 HF2 Switch LED Colors and Meanings
LED Color Meaning Notes
“Status” None The card/switch
module is not
operating.
Integrated Ethernet
management LAN adapter card
(in the top slot) & integrated
8-port fibre card (in the middle
slot): the card can be safely
removed by qualified
Hewlett-Packard personnel only.
A6388A HF2 8-port fibre or
A6389A HF2 4-port copper
switch module in the expansion
slot (the bottom slot): the switch
module can be safely removed by
you or qualified Hewlett-Packard
personnel.
Solid
yellow
A fault is
occurring on the
card/switch
module.
Solid green The card/switch
module passed the
self-test and is
operating.
“Power A” and
“Power B”
None Power to switch is
off.
Solid green Power to switch is
on.
One LED solid green: switch is
still operational.
“Ethernet
Port Main”
and “Ethernet
Port Aux”
None Ethernet port is
disconnected.
This can happen if the Ethernet
port is not correctly connected to
the Ethernet network, or the
integrated Ethernet
management LAN adapter card
is experiencing a fault.
Management is disabled when
the Ethernet port is not
operating, however, this does not
prevent the fabric from
operating.
Solid green Connection from
the Ethernet port
to the Ethernet
network is
operational.
Flashing
green
Data is flowing
between the
Ethernet port and
the Ethernet
network.