Setup and Install

Managing HyperFabric
Displaying Status and Statistics
Chapter 4
94
============================================================================
Date: Sat Aug 5 16:08:30 2000
Node: bently7.corp2.com
----------------------------------------------------------------------------
Adapter ID: clic1
Instance Number: 1
Adapter Type: 1X PCI or HSC
Firmware File: /opt/clic/firmware/clic_fw_1x32c
Major Num: 238
Mgmt process driver handle: 5
Version: 1.0
H/W Path: 8/4/0/0
Primary IP address: 192.0.0.9
Uptime time: 0 days 21 hours 1 min 3 sec
Adapter State Flags Set - Multiple flags may be set:
Configured and operational
Switch mode
F/W Error Statistics
Frame buffer overflow: 0
Receive on disabled endpoint: 0
Invalid endpoint ID: 0
Invalid endpoint protection key: 0
Interleaved gathered receive: 0
Interleaved multi-frame bulk messages: 0
NQ overflow: 0
Send NQ overflow: 0
Invalid slot key for NQ credit update: 0
DLPI QOS receive buffer shortage: 0
Link congestion events: 0
Max send packet retry exceeded: 0
Link or switch failure events: 0
Link or switch resume events: 1
Bad route detected: 0
Bad optional data length: 0
Invalid message received: 0
CRC error: 0
Invalid CRC word: 0
Bad frame length: 0
Receive buffer overflow: 0
Null packets generated on link reset: 2
Firmware reset notification: 0
Data corruption notification: 0
Unsupported QOS message received: 0
Invalid HMP VC ID: 0
Invalid HMP endpoint ID: 0
Invalid HMP endpoint protection key: 0
HMP message order violation: 0
Packet drops: 0
Transmit side congestion events: 1
Receive side congestion events: 0
Other Misc Statistics
Mapping message send failures: 0
============================================================================