Setup and Install

Configuring HyperFabric
Configuring HyperFabric with MC/ServiceGuard
Chapter 4
106
Configuring MC/ServiceGuard for HyperFabric Relocatable IP Addresses
If you are using HyperFabric version B.11.00.05, B.11.11.00, or later (note no HP-UX
10.20), and you want to use relocatable IP addresses, configure the relocatable IP
addresses with the IP[n] command in the package control script.
For example, to configure the relocatable address 192.0.0.3 for adapter 0 and
192.0.8.5 for adapter 1, specify this:
IP[0]= 192.0.0.3
IP[1]= 192.0.8.5