Administrator's Guide

Installing HyperFabric
Installing HyperFabric Switches
Chapter 360
Figure 3-3 shows the front of the HF2 switch with an A6389A HF2 4-port
copper switch module installed in the switch’s expansion slot.
Figure 3-3 Front of HF2 Switch (A6389A Switch Module Installed)
You can install the HF2 switch in one of the following ways:
• Using the rail kit that is shipped with the switch (see the next
section, “With the Rail Kit”). HP strongly recommends installing the
HF2 switch this way.
• Attaching the switch directly to the rack (see “Without the Rail Kit”
on page 65).
Port
6
Port
7
Port
5
Port
4
Port
3
Port
2
Port
1
Port
0
Port
8
Port
9
Port
10
Port
11
A6389A HF2 4-port copper
Integrated 8-port
Integrated Ethernet management
LAN card
fiber card
switch module in
expansion slot
Power
A
Ethernet
Port
B
Main
Ethernet
Aux
Port
Label showing
Ethernet MAC
address
Port LED
colors and
meanings
legend
Status
Status
Status