Administrator's Guide

Installing HyperFabric
Installing the Software
Chapter 3 51
Installing the Software
This section describes the HyperFabric file structure and the steps
necessary to load the software. The software must be installed on each
instance of the HP-UX operating system in the fabric.
File Structure
The HyperFabric file structure is shown in Figure 3-1 below. The
structure is shown for informational purposes only. The user cannot
modify any of the files or move them to a different directory.
Figure 3-1 HyperFabric File Structure
/
/etc
/rc.config.d
/clic_global_conf
/sbin
/init.d
/clic
/var/adm
/clic_log
/clic_ip_drv.trc
/usr
/conf
/lib
/libclic_dlpi_drv.a
/libha_drv.a
/master.d
/clic
/opt
/clic
/bin
/clic_diag
/clic_init
/clic_mgmtd
/clic_mond
/clic_start
/clic_stat
/lib
/libclic_mgmt.a
/firmware
/clic_fw
/clic_log.old
/opt
/resmon
/dictionary
/clic_01
/clic_ping
/clic_shutdown
/clic_fw_db
/clic_dump
/OLDclic_log
/share
/man
/man1m.Z
/clic_probe
/clic_fw_1x32c
/clic_fw_4x8c
/clic_fw_4x32c
/clic_fw_hf28c
/clic_fw_hf232c
/clic_ip_drv.trc0
/clic_ip_drv.trc1