Administrator's Guide

Installing HyperFabric
Installing HyperFabric Adapters
Chapter 350
You are asked if you want to continue. If you reply Yes, client applications
are suspended. Replace the adapter according to the procedure described
in the “Managing PCI Cards with OLAR” chapter of the Configuring
HP-UX Peripherals manual.
When an adapter has been replaced, client application activity resumes
unless the TCP timers or the application timers have popped.
CAUTION Do not use the clic_start command or the clic_shutdown command,
while an installed adapter is suspended. Do not use SAM to start or stop
HyperFabric while an installed adapter is suspended. The operation will
fail and an error message will be displayed.
After a HyperFabric adapter has been replaced, SAM checks the
replacement adapter to ensure that it is permitted according to the
like-for-like rules. If the adapter is permitted, SAM automatically
activates it. If it is not permitted, SAM displays an error message.