Administrator's Guide

Troubleshooting HyperFabric
LED Colors and Their Meanings
Chapter 6152
“Port x ” None Port is not
operational.
• A cable is not attached
correctly to the port or no
cable is attached at all.
• The port is connected to a
non-operational adapter in
an HP 9000. (See “Adapter
LEDs” on page 143 or
Table 6-2 on page 145 for
some tips about a
non-operational adapter.)
• The cable is bad.
• The port is bad. Note that if
a port is bad, and (for some
reason) you cannot use a
different port on that
card/switch module, you can
replace the card/switch
module. The integrated
8-port fiber card (in the
middle slot): the card can be
safely removed by qualified
HP personnel only. A6388A
HF2 8-port fiber or A6389A
HF2 4-port copper switch
module in the expansion
slot (the bottom slot): the
switch module can be safely
removed by you or qualified
HP personnel. First, try
powering the switch off and
then back on.
Solid green Connection from
port to adapter is
operational.
Flashing
green
Data is flowing
between the port
and the adapter.
Data does not start to flow until
HyperFabric initialization has
occurred.
Table 6-3 HF2 Switch LED Colors and Meanings (Continued)
LED Color Meaning Notes