Administrator's Guide

Managing HyperFabric
Displaying Status and Statistics
Chapter 5122
Firmware reset notification: 0
Data corruption notification: 0
Unsupported QOS message received: 0
Invalid HMP VC ID: 0
Invalid HMP endpoint ID: 0
Invalid HMP endpoint protection key: 0
HMP message order violation: 0
Packet drops: 0
Transmit side congestion events: 1
Receive side congestion events: 0
Other Misc Statistics
Mapping message send failures: 0
============================================================================
b. HMP in the local failover mode
If the local node is bently7, and you want to display the
statistics for the adapter clic1 (which is on bently7), issue this
command:
clic_stat -c clic1
The generated output could look like this:
============================================================================
Date: Sat Aug 5 16:08:30 2000
Node: bently7.corp2.com
----------------------------------------------------------------------------
Adapter ID: clic1
Card Pair: clic0
Instance Number: 1
Adapter Type: 4X HF2 PCI
Firmware File: /opt/clic/firmware/clic_fw_hf232c
Major Num: 238
Mgmt process driver handle: 5
Version: 1.0
H/W Path: 8/4/0/0
Primary IP address: 192.0.0.9
Uptime time: 0 days 21 hours 1 min 3 sec
Adapter State Flags Set - Multiple flags may be set:
Configured and operational
Switch mode
F/W Error Statistics