Administrator's Guide

Configuring HyperFabric
Configuring HyperFabric with ServiceGuard
Chapter 488
Figure 4-2 below shows a HyperFabric switch configuration with
ServiceGuard. This example shows a four-node configuration with two
HyperFabric switches, and redundant heartbeat Ethernet LANs.
NOTE Because the HyperFabric network does not currently support
ServiceGuard heartbeat connections, you must use an alternative type of
connection for the heartbeat, such as FDDI, Token Ring, 100BaseT, or
Ethernet (as shown in Figure 4-2).