User's Manual

If you cannot discover another device, try the following:
Making a Device Discoverable
Setting Up an Incoming or Outgoing COM
Port
3. If a passkey is requested, enter an alphanumeric
Passkey
between 1 and 16 characters in
Passkey
box, and press
Next
. Enter the same
Passkey
in the device requesting the partnership.
Usin
g
a
Passke
y
p
rovides
g
reater securit
y
.
4. To give the partnership a more meaningful name, change the name of the device in
Display
Name
.
5. Press
Done
.
●
Make sure Bluetooth is turned on.
●
Move closer to the device.
●
Make sure the device you are attempting to connect to is switched on and is in the discoverable
mode.
1. Press
Start > Settin
g
> Connections > Bluetooth
.
2. Press
Menu > Turn On Visibilit
y
.
NOTE:
If you no longer want your HP iPAQ to be discoverable, press
Menu > Turn Off
Visibility
.
1. Make sure
y
our HP iPAQ is connected to the other device via Bluetooth.
2. Press
Start > Settin
g
s > Connections > Bluetooth
.
3. Press
Menu > Com Ports
to set u
p
a new
p
ort.
4. Press
Menu > New Out
g
oin
g
Port
.
NOTE:
A new Outgoing Port is available only if there is at least one Bluetooth
device supporting serial (COM) connection.
5. Select a numbered COM
p
ort from the list.
NOTE:
A port is in use if it cannot be created; if so then select a different numbered
port.
6. To limit communication on this COM port only to devices with which your HP iPAQ has a
Bluetooth
p
artnershi
p
, select the
Secure connection
check box.
7. Press
Done
.