User's Manual

connection information for you. You can change these settings or create your

own network settings to your requirements.

1. Press Start > Settings > Connections > GPRS.

2. If your operator name appears in the list, select the name and press

Menu > Edit to edit the GPRS network settings.

Editing Network Parameters

CAUTION: Editing network parameters is not recommended unless

you are being assisted by your mobile phone service provider.

Connecting to a Laptop

You can use your HP iPAQ as a wireless modem. The Internet Sharing

software on your HP iPAQ and guides you during the connection process. If

you have not done so, insert a GPRS-enabled SIM into your HP iPAQ before

setting up Internet Sharing. You may also need to install the software drivers

(located on the Getting Started CD) on to your laptop. Before you can begin

Internet sharing, make sure you have a cellular connection. If you do not have

an active connection, you will not be able to launch the Internet Sharing

application.

To Connect to a laptop using a USB data connection

You may need to install the USB driver before connecting to your computer.

If your computer has automatically added your HP iPAQ as a new modem,

you can skip the following steps:

1. Connect your HP iPAQ to the computer using the mini-USB

synchronization data cable. Your computer may prompt you for the

wireless USB modem driver with a New hardware wizard menu screen.

Else proceed to To set up a USB modem connection.

2. Click Next on the welcome screen of the Install Wizard.

3. Select the Search for a suitable driver for my device

(recommended) option.

4. Select Specify a Location and browse to the C:\ drive folder that

contains the USB driver.

Connecting to a Laptop

Connections