User's Manual

Passkey in the device requesting the partnership. Using a Passkey

provides greater security.

4. To give the partnership a more meaningful name, change the name of

the device in Display Name.

5. Press Done.

If you cannot discover another device, try the following:

●

Make sure Bluetooth is turned on.

●

Move closer to the device.

●

Make sure the device you are attempting to connect to is switched on

and is in the discoverable mode.

Making a Device Discoverable

1. Press Start > Setting > Connections > Bluetooth.

2. Press Menu > Turn On Visibility.

NOTE: If you no longer want your HP iPAQ to be discoverable, press

Menu > Turn Off Visibility.

Setting Up an Incoming or Outgoing COM Port

1. Make sure your HP iPAQ is connected to the other device via Bluetooth.

2. Press Start > Settings > Connections > Bluetooth.

3. Press Menu > Com Ports to set up a new port.

4. Press Menu > New Outgoing Port.

NOTE: A new Outgoing Port is available only if there is atleast

one Bluetooth device supporting serial (COM) connection.

5. Select a numbered COM port from the list.

NOTE: A port is in use if it cannot be created, if so then select

a different numbered port.

Bluetooth

Connections