User's Manual

●
Object Push Protocol (OPP)
●
Serial Port Profile (SPP)
Creating, Accepting, and Ending a Bluetooth Partnership
You can create a partnership between your HP iPAQ and another device that
has Bluetooth capabilities. After you do this, the devices must have Bluetooth
turned on but do not need to be discoverable for you to exchange information
between them.
1. Make sure the two devices are turned on, discoverable, and within 10
meters from each other.
2. Press Start > Settings > Connections > Bluetooth.
3. To create a new partnership. press Add New Device. Your HP iPAQ
searches for other devices with Bluetooth capabilities and displays them
in the list.
4. Select the name of the other device you want to create a partnership with
and press Next.
5. Specify a Passkey for authentication.
6. Enter the same Passkey on the other device.
7. Press Done.
NOTE: Press Menu > Edit to rename a partnership.
To end a Bluetooth partnership:
1. Press Start > Settings > Connections > Bluetooth to view all the
partnerships you created on your HP iPAQ.
2. Scroll and select the connection you want to delete. Press Menu >
Delete
To accept a Bluetooth partnership:
1. Make sure your device is turned on, discoverable, and within close range.
2. When prompted to accept a partnership with the device that is requesting
the relationship, press Yes.
3. If a passkey is requested, enter an alphanumeric Passkey between 1
and 16 characters in Passkey, and press Next. Enter the same
58 Chapter 7 Connections