User's Manual

authentication information is needed by contacting your network

administrator.

1. To manually enter information, press Start > Settings > Connections

> Wi-Fi.

2. Select the network you want to configure and press Menu > Edit.

3. Press Next twice to reach 802.1x screen. Press Use IEEE 802.1x

network access control, and then select appropriate EAP type.

Configuring IP PBX using HP iPAQ Setup Assistant

You can make voice calls using VoIP and IP PBX (Internet Protocol Private

Branch Exchange) in addition to normal GSM calls. VoIP routes voice

conversations using an IP based network. VoIP to VoIP phone calls to any

provider are typically free.

To make calls using IP PBX:

1. On the Home screen, scroll to Internet calling, which is off by default,

and press the Action button.

2. Scroll and select the required option from the Use Internet Calling box.

3. You need to configure the Wi-Fi settings before you can use VoIP.

4. On the Home screen, the Internet Callingstatus changes to available

or selected.

5. Use the keypad to enter the number you want to dial and press the

Send key.

NOTE: On the Home, if the status of Internet Calling is No Service ,

it indicates that your HP iPAQ did not register successfully with the IP

PBX server.

To configure VoIP using HP iPAQ Setup Assistant:

1. Download and install the HP iPAQ Setup Assistant from the Getting

Started CD before you begin the configuration.

2. Open HP iPAQ Setup Assistant and click Manage Configuration >

New.

3. Click VoIP to configure the settings

Configuring IP PBX using HP iPAQ Setup Assistant

Connections