User's Manual

●
During the ActiveSync installation, if you inadvertently left the Microsoft
Exchange Server option box checked and are not planning to connect to
an Exchange server, follow these steps:
●
Connect your HP iPAQ to your computer. Be sure an ActiveSync
connection is established.
●
On your computer, click Start > All Programs > Microsoft
ActiveSync.
●
Click Tools > Options.
●
Clear the boxes for the sync items listed under the Server group.
●
Place a check mark in the boxes under the computer group for those
items you want to synchronize.
●
Disconnect your HP iPAQ from your computer and wait for the
ActiveSync message confirming that your device is no longer
connected. Reconnect your HP iPAQ to your computer. Wait to see if
your HP iPAQ connects to your computer.
●
On your computer, in ActiveSync, select File > Connection Settings.
Confirm that USB is selected as a potential connection method.
●
Connect your HP iPAQ to a different USB port on your computer.
●
Check your mini-USB synchronization cable. Consider using another
mini-USB synchronization cable if one is available to you.
●
Try synchronizing via a Bluetooth connection. Refer to the printed or CD-
based documentation that came with your HP iPAQ for specific
instructions.
●
Once your PC and HP iPAQ restart, reconnect your HP iPAQ to your PC.
●
Uninstall ActiveSync from your computer and then reinstall it. To
uninstall ActiveSync from your computer, click Start > Control Panel
> Add or Remove Programs > Microsoft ActiveSync. Then click
Remove > Yes.
●
After trying the above solutions without any success in solving your
connection problem, perform a factory reset on your HP iPAQ using the
HP iPAQ Setup Assistant.
You can reinstall your applications on your HP iPAQ after the hard or clean
reset is complete by using ActiveSync on your computer. After your HP iPAQ
30 Chapter 5 Learning the Basics