User's Manual

6. When the Synchronization Options screen displays, select the items
you want to synchronize between your HP iPAQ and your computer and
then click Next.
7. After your items have been synchronized, click Finish. The
Synchronization Setup Wizard starts synchronizing the items you
selected.
If ActiveSync does not begin the synchronization process, start it manually:
On your computer, open ActiveSync by selecting Start > All Programs >
Microsoft ActiveSync.
Changing the Type of ActiveSync Connection
You can change the type of ActiveSync connection being used between your
HP iPAQ and your computer to meet your specific needs.
You should use USB Serial Sync Mode if you:
●
Are having general problems with the ActiveSync connection between
your HP iPAQ and your computer.
●
Need to connect your HP iPAQ to your computer while you are using a
virtual private network (VPN) tunnel from your computer.
●
Are running personal or company-enforced firewall software on your
computer.
You should use USB RNDIS Mode if you are transferring large files and do
not have any connection issues between your HP iPAQ and your computer.
To change the ActiveSync mode on your HP iPAQ:
1. Press Start > Settings > Connections > More... > USB.
2. Press Menu > ActiveSync Settings.
3. Scroll and select RNDIS.
4. Press Done to change the ActiveSync mode or press the Back button
to return to Connections without saving the changes.
Troubleshooting Help for Synchronization Issues
This section gives information different synchronization troubleshooting
issues and their solutions. The Web sites with additional information on
troubleshooting is also included.
28 Chapter 5 Learning the Basics