User's Manual

To check the battery power:

▲

Press Start > Settings > Power Management.

Locking and Unlocking Your HP iPAQ

You can lock your HP iPAQ to prevent accidental key presses and

unintentional phone calls while you carry your HP iPAQ.

NOTE: When your device is locked, you can still receive phone call

notifications and see appointment reminders.

To lock your HP iPAQ:

1. Press and hold the Send key.

2. Unlock appears in the Left Softkey position.

To unlock your HP iPAQ:

1. Press the Left Softkey.

2. Press iPAQ.

Your HP iPAQ is unlocked and ready for use.

Entering Text

You can enter text and numbers on the HP iPAQ using the keypad. The HP

iPAQ supports two input modes for entering text: Multipress and T9. The

status indicator on the top of the display shows the input mode you are

currently using.

Changing Input Modes

You can change the text mode to T9 or Multipress mode as follows:

1. Press and hold * until the status indicator for the input mode you want is

shown at the top of the display screen.

2. To change options in the Multipress or the T9 modes, for example,

changes from abc to ABC, or from T9 to t9, press * and release.

The following table shows the list of input mode status indicators.

Locking and Unlocking Your HP iPAQ

Learning the Basics