User's Manual

NOTE: Whenever a replacement battery is inserted into your
HP iPAQ, press End key for at least two seconds. In case the
device does not switch on, attach an AC adapter to switch on
your HP iPAQ.
Step 4: Turn on your HP iPAQ
Press the Power Button/End Key to turn on your HP iPAQ. Next, follow the
instructions on the screen to complete the setup. Use the keypad to enter
information.
Protecting Your HP iPAQ with a Password
You can keep your data more secure by requiring a password every time you
turn on your HP iPAQ.
1. Press Start > Settings > Security > Device Lock.
2. Select the Prompt if device unused for check box, and select the
amount of time from the list box that your HP iPAQ must be unused
before the password is required.
3. In the Password type box, select the type of password you would like
to use. Enter the password and confirm the password.
4. Press Done.
The next time your HP iPAQ is unused for the specified amount of time, you
will be prompted to enter your password.
TIP: Use the same steps as above to change or reset your
password.
Finding the Serial Number and Model Number
Locate the Serial and Model numbers before contacting HP Customer
Support, particularly if you are calling for in-warranty support.
View the Serial Number and Model ID by pressing Start > More > HP Help
and Support > Serial and Model Number.
Step 4: Turn on your HP iPAQ
13
Setting Up Your HP iPAQ