Installation Manual

91
RSE-X2 front panel
Figure 89 RSE-X2 front panel
(1) Management Ethernet port (MANAGEMENT) (2) AUX port (AUX)
(3) MPU status LEDs (4) Reset button (RESET)
(5) USB port (6) Console port (CONSOLE)
(7) CF card slot (8) CF card button
(9) CF card status LED
RSE-X2 specifications
Item Remarks
Flash 8 MB
Memory type and size
• Default—Two 2-GB DDR3 SDRAMs
• Maximum—Two 2-GB DDR3 SDRAMs
NVRAM 128 KB
Console port
1
9600 bps (default) to 115200 bps
AUX port
1
9600 bps (default) to 115200 bps
Management Ethernet
port
1
10Base-T/100Base-TX/1000Base-T
CF card
• 1 GB by default for the built-in CF card
• 256 MB, 512 MB, and 1 GB for an optional external CF card (CF cards less than
256 MB are not supported.)
USB ports
1
(USB 0: Type A connector, operating in the host mode)
Switching capability
512 Gbps
Supporting integrated switch fabric
Reset button 1
Hot swapping Supported
NOTE:
• Flash memory stores the BootWare image.
• SDRAM stores running configuration and buffers data during data forwarding.
• Non-volatile random access memory (NVRAM) stores system exception logs.