Installation Manual

66
For data security, if you reboot the router while the router is performing file operations, the router does not
reboot.
The precision of the rebooting timer is 1 minute. One minute before the rebooting time, the router
prompts “REBOOT IN ONE MINUTE” and reboots in one minute.
If the main startup configuration file does not exist, do not use the reboot command to reboot the router
or the active MPU. In this case, you should specify the main startup configuration file first, and then
reboot the active MPU.
To reboot the router immediately at the CLI:
Task Command Remarks
Reboot the router or the card in the
specified slot immediately.
reboot [ slot slot-number ]
Available in user view.
If you do not specify the slot
keyword, the command reboots
the router, including the active
MPU, standby MPU, and the LPUs.
To schedule a reboot:
Task Command Remarks
Specify a reboot time and date. schedule reboot at hh:mm [ date ]
Available in user view.
By default, the reboot date and
time is not specified.
Specify a reboot waiting time.
schedule reboot delay { hh:mm |
mm }
Available in user view.
By default, the reboot delay time is
not specified.