Installation Manual

116
Table 49 SAP-48GBP LED description
LED Status Descri
p
tion
(green)
RUN
Off No power input is available or the SAP-48GBP has failed.
Slow flashing (1 Hz) The SAP-48GBP is operating correctly.
Fast flashing (8 Hz)
Application program is being loaded or the SAP-48GBP
is not operating.
CAUTION:
To avoid hardware damage, do not power off the router, or
insert or remove the SAP-48GBP when application
program is being loaded.
(yellow/green)
Status
LEDs of
SFP 0 to
SFP 47
Off No link is present.
Steady green A 1000 Mbps link is present.
Flashing green
Data is being received or transmitted at a rate of 1000
Mbps.
Steady yellow A 100 Mbps link is present.
Flashing yellow
Data is being received or transmitted at a rate of 100
Mbps.
Figure 110 SAP-4EXP LEDs
Table 50 SAP-4EXP LED description
LED Status
Descri
p
tion
(green)
RUN
Off
No power input is available or the SAP-4EXP has
failed.
Slow flashing (1 Hz) The SAP-4EXP is operating correctly.
Fast flashing (8 Hz)
Application program is being loaded or the
SAP-4EXP is not operating.
CAUTION:
To avoid hardware damage, do not power off the
router, or insert or remove the SAP-4EXP when
application program is being loaded.
(yellow/green)
Status LEDs
of SFP+ 0 to
SFP+ 3
Off No link is present.
Steady green A 10 Gbps link is present.
Flashing green
Data is being received or transmitted at a rate of 10
Gbps.
Steady yellow The transceiver module failed to be detected.