Installation Manual

114
LED Status Descri
p
tion
(green)
Fast flashing (8
Hz)
Application software is being loaded.
CAUTION:
To avoid the hardware damage, do not power off the
router, or insert or remove the FIP.
(yellow/green)
Off No link is present.
Steady green A 10 Gbps link is present.
Flashing green Data is being received or transmitted at 10 Gbps.
Steady yellow The transceiver module has failed the POST.
SAP LEDs
Figure 107 SAP-48GBE LEDs
Table 47 SAP-48GBE LED description
LED Status
Descri
p
tion
(yellow/gree
n)
Status LEDs
of GE 0 to
GE 47
Off No link is present.
Steady green A 1000 Mbps link is present.
Flashing green
Data is being received or transmitted at a rate of
1000 Mbps.
Steady yellow A 10/100 Mbps link is present.
Flashing yellow
Data is being received or transmitted at a rate of
10/100 Mbps.
(green)
RUN
Off
No power input is available or the SAP-48GBE has
failed.
Slow flashing (1 Hz) The SAP-48GBE is operating correctly.
Fast flashing (8 Hz)
Application program is being loaded or the
SAP-48GBE is not operating.
CAUTION:
To avoid hardware damage, do not power off the
router, or insert or remove the SAP-48GBE when
application program is being loaded.