Installation Manual

108
Table 41 Transceiver modules for the SAP-4EXP 10G Ethernet ports
Model
Central
wavelen
g
th
Connector Optical fiber
Max. transmission
distance
SFP-XG-SX-MM850-
A
850 nm LC
50/125 m multi-mode
optical fiber
300 m (984.25 ft)
SFP-XG-LX-SM1310 1310 nm LC
9/125 m single-mode
optical fiber
10 km (6.21 miles)
SFP-XG-LH40-SM15
50
1550 nm LC
9/125 m single-mode
optical fiber
40 km (24.86 miles)
NOTE:
• Use transceiver modules provided by HP only. The router might be incompatible with other transceiver
modules and thus displays alarms automatically.
• 1000 Mbps is not supported on the SAP-4EXP SFP+ ports.
• To support the wire-speed forwarding cross board on the SAP-4EXP, the HSR6808 router needs to be
installed with a SFE-X1.
SPE/OAP
HP HSR6800 routers support the service processing engine (SPE). Based on the open application
platform (OAP), the SPE can provide multiple services. For more information about the SPE and OAP, see
relevant datasheet.
HIM/MIM
HP HSR6800 routers support HIMs and MIMs. Both HIMs and MIMs provide synchronous serial ports,
Ethernet ports and E1 ports. For more information, see HP HSR6800 Routers Interface Module Guide.