Installation Manual

107
SAP-48GBP fixed Ethernet port specifications
The fixed Ethernet ports of the SAP-48GBP have the same specifications as the fiber ports of the FIP-110
combo interfaces. For more information, see Table 35.
T
ransceiver modules for the SAP-48GBP and the SAP-24GBP fiber ports are the same. For more
information, see Table 39.
SAP-4EXP
SAP-4EXP front panel
Figure 99 SAP-4EXP front panel
(1) SFP+ ports 0 to 3 (2) SAP module status LED (RUN)
(3) LEDs for SFP+ ports 0 to 3 (4) Ejector lever
(5) Captive screw
SAP-4EXP specifications
Item Remarks
Flash 8 MB
Memory type and size
• Default—Two 2-GB DDR3 SDRAMs
• Maximum—Two 2-GB DDR3 SDRAMs
NVRAM 128 KB
Fixed Ethernet ports (SFP+)
4
10G Ethernet ports
Hot swapping Supported
SAP-4EXP fixed Ethernet port specifications
Table 40 10G Ethernet port specifications
Item Su
pp
orted standard
Protocol standard 802.3ae
Connector type LC
Transceiver module SFP+
Physical layer type
supported
10GBASE-R/W
Interface rate
• In LAN PHY mode: 10.3125 Gbps
• In WAN PHY mode: 9.95328 Gbps