Installation Manual

92
Figure 82 Securely fasten cables
(1) Flat washer (2) Sprin
g
washer (3) Nut
• Fasten heavy or rigid power cables at the connectors to relief stress.
• Do not use tapping screws to fasten the connecting terminals.
• Bind together cables that are the same type and routed in the same direction.
Table 46 lists the c
able bundling specifications.
Table 46 Cable bundling specifications
Cable bundle diameter (mm) S
p
ace between bundles (mm)
10 80 to 150
10 to 30 150 to 200
30 200 to 300
• Do not tie cables or bundles in a knot.
• The metal parts of the crimped cold-pressed terminal blocks (such as circuit breaker) cannot
protrude beyond the blocks.
Cable routing example
Cables on an HSR6600 router can be routed as shown in Figure 83.
(1)
(1)(2) (3)
(1)
(1)(2) (3)