Installation Manual

80
Fiber Ethernet port
Table 34 Fiber Ethernet port specifications
Item S
p
ecification
Connector type LC
Transceiver module type SFP
Interface standards 802.3, 802.3u, and 802.3ab
Transmission
power
Type
Short-haul
multi-mode
(850 nm)
Mid-haul
single mode
(1310 nm)
Long haul
(1310 nm)
Long haul
(1550 nm)
Super long
haul (1550
nm)
Minimum –9.5 dBm –9 dBm –2 dBm –4 dBm –4 dBm
Maximum 0 dBm –3 dBm 5 dBm 1 dBm 2 dBm
Receive sensitivity –17 dBm –20 dBm –23 dBm –21 dBm –22 dBm
Central wavelength 850 nm 1310 nm 1310 nm 1550 nm 1550 nm
Fiber type
62.5/125
m
multi-mode
9/125 m
single mode
9/125 m
single mode
9/125 m
single mode
9/125 m
single mode
Max. transmission distance
0.55 km
(0.34 miles)
10 km (6.21
miles)
40 km
(24.86 miles)
40 km
(24.86 miles)
70 km
(43.50 miles)
Operating mode 100/1000 Mbps, full duplex
10 Gbps Ethernet port
The HSR6602-XG/HSR6602-XG TAA provides two 10 Gbps Ethernet ports. 10 Gbps SFP+ ports do not
support 1000 Mbps transceiver modules.
Table 35 10 Gbps Ethernet port specifications
Item S
p
ecification
Protocol 802.3ae
Connector type LC
Transceiver module type SFP+
Physical layer 10GBASE-R/W
Transmission rate
• LAN PHY—10.3125 Gbps
• WAN PHY—9.95328 Gbps
Table 36 10 Gbps SFP+ transceiver module specifications
Model
Central
wavelen
g
th
Connector
t
yp
e
Fiber type
Max. transmission
distance
SFP-XG-SX-MM850-A 850 nm LC 50/125m multi-mode 300 m (984.25 ft)
SFP-XG-LX-SM1310 1310 nm LC 9/125m single mode 10 km (6.21 miles)