Installation Manual

51
0 Fixed SubCard Normal 9
Table 11 Output description
Field Descri
p
tion
Slot 0 Interface module model
SubSlot No. Slot number of the interface module
Card Type Module model. The value NONE indicates that no module is present in the slot.
Status
Running status of the module:
• Absent—No module is present in the slot.
• Fault—The module in the slot is booting, or the module fails and cannot boot properly.
• Normal—The module in the slot is a service module and is operating properly.
Max Ports Maximum number of interfaces that the module supports.
Displaying the electrical label information of a module
Use the display device manuinfo command to display the electrical label information of the module in
each slot.
Electrical label information is also called permanent configuration data or archive information, which
includes the module name, serial number, MAC address, and vendor name.
<Sysname> display device manuinfo
Slot 0:
DEVICE_NAME:HSR6602-XG JG354A
DEVICE_SERIAL_NUMBER:CN12FRX123
MAC_ADDRESS:000F-E123-4567
MANUFACTURING_DATE:2012-02-02
VENDOR_NAME:HP
Slot 1:
DEVICE_NAME:HP HSR6602-XG FIP-20 Flex Intf Pltfm Rtr Mod JG358A
DEVICE_SERIAL_NUMBER:CN12FS1123
MAC_ADDRESS:NONE
MANUFACTURING_DATE:2012-02-02
VENDOR_NAME:HP
Use the display device manuinfo slot slot-number command to display the electrical label
information of the module in the specified slot.
<Sysname> display device manuinfo slot 0
Slot 0:
DEVICE_NAME:HSR6602-XG JG354A
DEVICE_SERIAL_NUMBER:CN12FRX123
MAC_ADDRESS:000F-E123-4567
MANUFACTURING_DATE:2012-02-02
VENDOR_NAME:HP