Specification Sheet

QuickSpecs

HPE OfficeConnect 1920S Switch Series

Overview

Page

Supports up to 9216 bytes frame size to improve the performance of large data transfers

• VLAN support and tagging

Support for IEEE 802.1Q; 256 VLANs with a VLAN ID range of 2-4093

Layer 3 services

• Address Resolution Protocol (ARP)

Displays the MAC address of another IP host in the same subnet; supports static ARPs; proxy ARP allows normal ARP

operation between subnets or when subnets are separated by a Layer 2 network

• DHCP relay

Simplifies management of DHCP addresses in networks with multiple subnets

Layer 3 routing

• Static IPv4 routing

Provides basic routing supporting up to 32 static routes to allow manual routing configuration

• Link aggregation

Groups together multiple ports up to a maximum of eight ports per trunk either automatically using Link Aggregation

Control Protocol (LACP), or manually, to form an ultra-high-

bandwidth connection to the network backbone; help prevent

traffic bottlenecks. The 8 port models support 4 trunks, 16 and 24 port models support 8 trunks, 48 port models support

16 trunks.

Convergence

• LLDP-MED (Media Endpoint Discovery)

Defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to configure network

devices such as IP phones automatically

• Auto voice VLAN

Recognizes IP phones and automatically assigns voice traffic to dedicated VLAN for IP phones

Warranty and support

• Limited Lifetime Warranty

See http://www.hpe.com/officeconnect/support

for warranty and support information included with your product

purchase.