Specification Sheet

QuickSpecs
HPE OfficeConnect 1920S Switch Series
Accessory Product Details
Page
23
NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.
HPE X121 1G SFP LC SX
Transceiver
(J4858C)
A small form
-factor
pluggable (SFP) Gigabit
SX
transceiver that provides a
full
-duplex Gigabit s
olution
up to 550 m on multimode
fiber.
Ports
1 LC 1000BASE-SX port; Duplex: full only
Physical characteristics
Dimensions: 2.24(d) x 0.54(w) x 0.48(h) in. (5.69 x 1.37 x 1.22 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP
Environment
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 203°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)
Electrical characteristics
Power consumption typical: 0.4 W
Power consumption maximum: 0.7 W
Cabling
Type:
• 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-
index, low metal content, multimode fiber optic, complying with
ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively;
Maxim
um distance:
• 2-220 m (62.5 µm core diameter, 160 MHz*km bandwidth
• 2-275 m (62.5 µm core diameter, 200 MHz*km bandwidth
• 2-500 m (50 µm core diameter, 400 MHz*km bandwidth)
• 2-550 m (50 µm core diameter, 500 MHz*km bandwidth)
Cable length: 2-550m
Fiber type: Multi Mode
Services
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services
for details on the service-
level
descriptions and product numbers. For details abou
t services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.
HPE X121 1G SFP LC LX
Transceiver
(J4859C)
HPE
X121 1G SFP LC LX
Transceiver: An SFP
format
gigabit transceiver with LC
connectors using LX
technology.
Ports
1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX); Duplex: full
only
Physical characteristics
Dimensions: 2.24(d) x 0.54(w) x 0.486(h) in. (5.69 x 1.37 x 1.23 cm)
Weight:0.04 lb. (0.02 kg)
Environment
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 212°F (-40°C to 100°C)
Altitude: up to 10,000 ft. (3 km)
Cabling
Type:
• Either single mode or multimode; 62.5/125 µm or 50/125 µm
(core/cladding) diameter, graded-index, low metal content,
multimode fiber optic, complying with ITU-T G.651 and ISO/IEC
793-2 Type A1b or A1a, respectively; Low metal content, single-
mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2