Specification Sheet

QuickSpecs
HPE OfficeConnect 1920S Switch Series
Technical Specifications
Page
15
Altitude
up to 10,000 ft (3 km)
Acoustic
Power: 0 dB no fan
Electrical characteristics
Frequency
50/60 Hz
AC Voltage
100 - 240 VAC
Current
.9 A
Maximum power rating
72.9 W
Idle power
9.7 W
PoE power
65 W PoE+
Safety
UL 60950-1; IEC 60950-1; EN 60950-1; CAN/ CSA-C22.2 No. 60950-1; EN 60825-1
Emissions
VCCI Class A; CNS 13438; ICES-003 Issue 5 Class A; FCC CFR 47 Part 15, Class A; EN 55032:
2015/CISPR-32
Immunity
Generic
EN 55024, CISPR 24
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8
Voltage dips and
interruptions
IEC 61000-4-11
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
Device Management
Web browser
Services
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
details on the service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1920S 24G 2SFP PPoE+ 185W Switch (JL384A)
I/O ports and slots
12 RJ-45 autosensing 10/100/1000 PoE+ ports; Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
12 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
2 SFP 100/1000 Mbps ports (IEEE 802.3z Type 1000BASE-X, IEEE 802.3u Type 100BASE-FX)
Physical characteristics
Dimensions
17.42(w) x 9.69(d) x 1.73(h) in
(44.25 x 24.61 x 4.39 cm) (1U height)
Weight
7.3 lb (3.31 kg)
Memory and processor
ARM Cortex-A9 @ 400 MHz, 256 MB SDRAM, 64 MB flash; packet buffer: 1.5 MB
Performance
100 Mb Latency
< 7.0
µ
s
1000 Mb Latency
< 2.0 µs
Throughput
38.6 Mpps
Routing/Switching
capacity
52 Gbps
Routing table size
32 entries