Specification Sheet

QuickSpecs
HPE OfficeConnect 1920S Switch Series
Configuration
Page
10
Configuration Rules:
Note 1
The following Transceivers install into this switch:
HPE X121 1G SFP LC SX Transceiver
J4858C
HPE X121 1G SFP LC LX Transceiver
J4859C
HPE X121 1G SFP RJ45 T Transceiver
J8177C
HPE X111 100M SFP LC FX Transceiver
J9054C
Note 2
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) . (See
Localization Menu)
REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be the Defaulted Power
Cable option on the Switches/Routers.
#AC3 No Localized Power Cord Selected
Remarks:
If this switch is factory installed in any HPE Racks, Then the J9583A#0D1 is required. 
Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.
Transceivers
SFP Transceivers
HPE X121 1G SFP LC SX Transceiver
J4858C
HPE X121 1G SFP LC LX Transceiver
J4859C
HPE X121 1G SFP RJ45 T Transceiver
J8177C
HPE X111 100M SFP LC FX Transceiver
J9054C
Cables
Multi-Mode Cables
HPE LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
AJ833A
HPE LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
AJ834A
HPE LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
AJ835A
HPE LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
AJ836A
HPE LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
AJ837A
HPE LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
AJ838A
HPE LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
AJ839A
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
QK732A
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
QK733A
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
QK734A
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
QK735A
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
QK736A
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
QK737A