User Manual

37- 31
m
*
38- 44 --
01
39-43,33 01
REGISTERS
n: Unused i: Unused
PV: Unused PMT: Unused
FV: Unused
R
0
: m
R
1
: X
1
R
2
: X
2
R
3
: X
3
R
4
: X
4
R
5
: X
5
R
6
: X
6
R
7
: X
7
R
8
: X
8
R
9
: X
9
R
.0
: X
10
R
.1
: X
11
R
.2
: X
12
R
.3
-R
.4
: Unused
*
At step 38, m=number of elements in the moving average, i.e. fir a 5 element
moving average line 38 would be 5 and for a 12-element average line 38
would be 2
This program can be used for a moving average of 2 to 12 elements. It may be
shortened considerably for moving averages with less than 12 elements. To do
this, key in the program, as shown, form line 01 until you reach a
superscripted with the number of elements you desire. Key in this line, then skip
the reset of the program down to line 35. Then key in lines 35 through 39, being
sure to specify the register number at line 38,
m, corresponding to the
number of elements you are using. (For instance, for a 5 element moving
average, key in lines 01 through 13 then go to line 35 in the listing and key in the
balance of the program. Obviously the program listing line 38, m becomes
the displayed line 17, 5).
To run the program:
1. Key in the program.
2. Press
CLEAR . Key in the number of elements, m, and press 0.
3. Key in the second data point and press
1.
4. Key in the second data point and press
2.