Video Port Guide

notebook PC video port guide (also see computer owner’s manual)
computer model key command to activate/deactivate video port
Note 350, 750,760, 780, 950 Ctrl-Alt-ESC while computer boots activates the setup
menu; system config; advanced sys config; display
device; LCD/CRT
Acer
Note 971 FN + F5
Ascentia, Ascentia A Series, PowerExec,
9xxN
FN + F5
Ascentia J Series FN + F3
Ascentia P Series, Bravo 800N, B5N FN + F12
AST
Premium Exec FN + D
BTO BN + F6
Innova 386NX Setup Menu Options
Innova Book 360CD, 490CDS FN + F7
Canon
NoteJet 3CX Change CMOS to CRT
Armada, LTE, Contura FN + F4
Presario FN + F2
Compaq
Other Automatic, Ctrl-Alt <
Latitude, CP-Inspiron FN + F8
FN + F12
Dell
Other Ctrl-Alt-<
FN + D
650C Set Switch to CRT Epson
Other FN + F12
Fujitsu Lifebook FN + F10
Solo, Liberty FN + F3
Colorbook FN + F1
Gateway
Colorbook 2 Option in CMOS setup
M120T/1000, M100D FN + F7 Hitachi
E100D/810 FN + F8
Hewlett-
Packard
Omnibook, Pavilion FN + F5
FN + F12
Thinkpad 310, 36x, 380, 701, 75x,
760, 560, 770
FN + F7
Thinkpad 350, PS/Note 425C FN + F1 for setup
LX40 Setup LCD to CRT
IBM
Thinkpad 700 Ctrl-Alt-S
PowerBook 3400 Select Monitor Icon on PowerBook Control Strip,
select resolution to match display device (e.g.
800x600 Simulscan for simultaneous display on
PowerBook and on projector)
PowerBook 1400 Requires optional video card. Select Monitor Icon on
PowerBook Control Strip, select resolution to match
display device (e.g. 800x600 Simulscan for
simultaneous display on PowerBook and on projector)
PowerBook 160, 165, 180, 520, 540,
5300
Control Panel folder, PowerBook Display folder,
activate Video Mirroring, warm reboot. Or (if display
problems occur with mirroring) Control Panel folder,
Monitors, switch primary display by dragging white
menu bar to Monitor 2.
PowerBook 140, 145, 150, 170 No video port. Requires 3
rd
party interface.
G3 PowerBook Reboot
G4 PowerBook Command Key + F1
Macintosh
Portable 100 Not compatible