HP StorageWorks XP Disk Array Mainframe Host Attachment and Operations Guide XP24000, XP20000 (A5951 - 96151, September 2007)

devices. The following table lists ICKDSF commands that are specific to the storage system, as
contrasted to RAMAC.
Table 12 ICKDSF Commands for XP Disk Array Contrasted to RAMAC
Return CodeStorage SystemArgumentCommand
CC = 12 Invalid parameter(s) for device type.RAMACKEEPITINSPECT
CC = 12, F/M = 04 (EC=66BB).XP disk array
CC = 4 Parameter ignored for device type.RAMACPRESERVE
CC = 12, F/M = 04 (EC=66BB) Unable to
establish primary and alternate track association
for track CCHH=xxxx.
XP disk array
CC = 4 Parameter ignored for device type -
skip.
RAMACSKIP
CC = 12, F/M = 04 (EC=66BB) Primary track
CCHH-xxxx found unrecoverable.
XP disk array
CC = 0, ALT information not displayed.RAMACNOPRESERVE,
NOSKIP,
CC = 0XP disk arrayNOCHECK
CC = 12 Invalid parameter(s) for device type.RAMACALLTRACKS,
ASSIGN,
RECLAIM
In case of PRESERVE: CC = 12, In case of NO
PRESERVE: CC = 0.
XP disk array
CC = 0 (but not recommended by IBM).RAMACSETMODE
(3390)
INSTALL
CC = 0XP disk array
CC = 12, Invalid parameter(s) for device type.RAMACSETMODE
(3380)
CC = 12, Function not supported for
nonsynchronous DASD.
XP disk array
CC = 0RAMACANALYZE
CC = 0XP disk array
CC = 0RAMACBUILDX
CC = 0XP disk array
CC = 12 Device not supported for the specified
function.
RAMACREFRESHREVAL
z/OS Operations54