HP StorageWorks XP Disk Array Mainframe Host Attachment and Operations Guide XP24000, XP20000 (A5951 - 96151, September 2007)

| WLMPAV Yes Device supports work load manager |
| SHARED Yes Device shared with other systems |
| SHAREDUP No Shared when system physically partitioned |
| ***************************** Bottom of data ****************************** |
| |
| |
| F1=Help F2=Split F3=Exit F4=Prompt F5=Reset |
| F7=Backward F8=Forward F9=Swap F12=Cancel |
'-----------------------------------------------------------------------------'
17. When the Define Device to Operating System Configuration panel appears, press F3.
18. The Update Serial Number, Description and VOLSER panel now displays the device addresses.
To add more control units or device addresses, repeat the previous steps.
.---------- Update Serial Number, Description and VOLSER -----------.
| Row 1 of 128 |
| Command ===> _________________________________ Scroll ===> PAGE |
| |
| Device number . . : 8000 Number of devices : 128 |
| Device type . . . : 3390B |
| |
| Specify or revise serial number, description and VOLSER. |
| |
| Device Number Serial-# Description VOLSER |
| 8000 __________ 3390 Base addresses 8000-807F ______ |
| 8001 __________ 3390 Base addresses 8000-807F ______ |
| 8002 __________ 3390 Base addresses 8000-807F ______ |
| 8003 __________ 3390 Base addresses 8000-807F ______ |
| 8004 __________ 3390 Base addresses 8000-807F ______ |
| 8005 __________ 3390 Base addresses 8000-807F ______ |
| 8006 __________ 3390 Base addresses 8000-807F ______ |
| 8007 __________ 3390 Base addresses 8000-807F ______ |
| 8008 __________ 3390 Base addresses 8000-807F ______ |
| 8009 __________ 3390 Base addresses 8000-807F ______ |
| 800A __________ 3390 Base addresses 8000-807F ______ |
| F1=Help F2=Split F3=Exit F5=Reset F7=Backward |
| F8=Forward F9=Swap F12=Cancel |
'-------------------------------------------------------------------'
Defining the Storage System to VM/ESA Systems
64 or Fewer LVIs: To define a storage system with less than or equal to 64 LVIs to a VM/ESA system,
use the same procedure as for an IBM 3990-6E storage system. To define a storage system with more
than 64 LVIs to VM/ESA, enter the LVI address range, storage type, and sharing option for the storage
system as shown (the address range varies for each installation).
[Address Range] TYPE DASD SHARED YES
More than 64 LVIs: To define a storage system with more than 64 LVIs to VSE/ESA, use the same
procedure as for an IBM 3990-6E storage system. For storage systems with more than 64 LVIs, the
ADD cuu:cuu ECKD statements are the same as for the IBM 3390.
CAUTION:
There may be APAR requirements at different versions of the VM software. In addition, certain requirements
apply when VM is supporting guests (for example, OS/390) that can run 2105 native. For further
information, see the IBM documentation.
Defining the Storage System to TPF
The storage system supports the IBM Transaction Processing Facility (TPF) and Multi-Path Locking
Facility (MPLF) functions in either native mode or under VM. MPLF support requires TPF version 4.1
or higher, and RAID-5+ and 3390-3/3R LVIs are supported. The storage system's TPF/MPLF capability
z/OS Operations52