HP StorageWorks XP24000/XP20000 Disk Encryption Users Guide (AE131-96060, March 2009)

DescriptionItem
Parity group numberParity group
Encryption setting status:
• Enable: Encryption is enabled.
• Disable: Encryption is disabled.
Encryption
The status of the volumes in the parity group is shown.
• Normal: The volume is in normal status.
• Blocked: The volume is in a blocked status. Hosts cannot access the blocked volume.
• Warning: The volume has a problem.
• Format: The volume is being formatted.
• Preparing Quick Format: The volume is being prepared for Quick Format.
• Normal (Quick Format): Quick Format is being executed on the volume
• Correction Access: The access attribute of the volume is being changed.
• Correction Access with Redundancy: The access attribute of the volume is being changed.
• Copying: Data in the volume is being copied.
• Read Only: Hosts can only read the volume. Hosts cannot write any data to the volume
that is in Read Only status.
• Shredding: The shredding operation is in progress.
• Unknown: The system does not recognize the status of the volume.
• — (a hyphen): There are no volumes in the parity group.
Status
Enables the encryption of the selected parity group.Set
Disables the encryption of the selected parity group.Release
Using the DKA Encryption License Key windows18