HP StorageWorks XP24000 Disk Array Site Preparation Guide, v01 (AE131-96002, June 2007)

Figure 17 Unpacking procedure
7. Using a 6 mm hex and 19 mm wrench, remove the adapter plates that anchor the cabinet to the
pallet (item 7).
8. Remove the poly bag covering the cabinet (item 8).
9. Following the instructions provided on the wooden ramp, attach the ramp to the pallet and roll
the cabinet onto the floor.
10. Visually check the unit for any damage. If any damage is visible, report it immediately to HP and
the shipping carrier.
XP24000 Disk Array Site Preparation Guide 65