HP StorageWorks XP24000 Disk Array Site Preparation Guide, v01 (AE131-96002, June 2007)

Russellstoll connectors are available through most electrical distributors. HP has arranged for the
distributors listed below to stock these connectors. These distributors are able to ship worldwide via
your preferred carrier.
Beck Electrical Supply, 2775 Goodrick Avenue, Richmond, CA 94801. USA Telephone: (800)
466-4395. Fax: [phone]. Contact: Ken Mogan, [e-mail].
Website: http://beckelectric.com/store/index.php
Source Research, Inc. (SRI), 2160 Sunnydale Boulevard, Clearwater, FL 33765-2108. USA Telephone:
[phone]. Contact: Erik Peterson, telephone extension 302.
Website: http://www.sourceresearch.com/index.cfm
Three-phase AC cabling for the USA (60 Hz)
Each three-phase DKU has two main disconnect devices (two main breakers for dual power lines) so
that AC power to the unit can be supplied from separate power distribution panels with two
power-supply cords.
CAUTION:
An HP representative should be present whenever the disk array is being connected to a new power source
for the first time.
Connecting the external power-supply cords
The HP XP24000 disk array is factory-configured for 30-amp, three-phase power.
30-amp, three-phase power cords
When the disk array uses 30-amp, three-phase input power, the DKC and DKUs have two power
cords each.
XP24000 Disk Array Site Preparation Guide 53