HP StorageWorks XP24000 Disk Array Site Preparation Guide, v01 (AE131-96002, June 2007)

Table 5 DKU dimensions
DKU packagedDKU unpackagedDimension
incmincm
37.49525.665Width
43.711136.4292.5Depth
82.320975.6192Height
Weights
Use the approximate packaged weights when determining delivery requirements, and unpackaged
weights to calculate the total weight of your configuration. Plan your facility to accommodate the
weight of the maximum configuration for each DKC and DKU even if you expect to start with an empty
cabinet and add components later. For weights of individual components, see the table under the
heading Component heat, power, and weight specifications on page 37.
The following table provides the approximate DKC and DKU weights for:
• Minimum configuration consisting of one base cabinet with minimal components
• Maximum configuration consisting of one base cabinet fully populated with components.
Table 6 XP24000 DKC and DKU minimum configuration weights
lbkgCabinet, minimum configuration
1113505DKC, unpackaged
1323600DKC, packaged
849385DKU, unpackaged
1049476DKU, packaged
Table 7 XP24000 DKC and DKU maximum configuration weights
lbkgCabinet, maximum configuration
1745791DKC, unpackaged
1955887DKC, packaged
1579716DKU, unpackaged
1779807DKU, packaged
For each DKC or DKU shipment from the USA to locations outside the USA and Canada, add 59 kg
(130 lbs.) for a wooden international shipping crate. Within the USA, most shipments use a special
carrier process in which frames are shipped without pallets, ramps, and cartons. In these cases, the
packaged weight is the unpackaged weight plus 23 kg (50 lb). For upgrade DKU packaging (includes
a ramp), add 23 kg (50 lbs.).
XP24000 Disk Array Site Preparation Guide 21