HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

Audit Log Reference Guide 155
Set Prio WWN Operation
[PFC]
Performance Control function
Set Prio WWN
Set Prio WWN operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in Table 107.
Table 107 Detailed Information for Set Prio WWN Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[PFC],Set Prio WWN,,Normal
end,Seq.=xxxxx
+{WWN,Priority,,Mode}=[{0xXXXXXXXXXXXXXXXX,Non-Prio,XXXXXXXX,IOPS}],
Num of WWNs=1
Item Description
WWN Indicates WWN of the host bus adapter. WWN is a 16-digit number in the hexadecimal
format.
Priority The attribute set to the host bus adapter.
Prio: Prioritized WWN, Non-Prio: Non-prioritized WWN
Upper Limit The upper limit value when the attribute is set to non-prioritized WWN.
This value is not output when the attribute is set to prioritized WWN.
Mode The type of rate used for the upper limit control.
IOPS: I/O rate, KB/s: Transfer rate
This value is not output when the attribute is set to prioritized WWN.
Num. of WWNs The number of WWNs of the host bus adapters that the setting is changed.