HP StorageWorks Audit Log reference guide (5697-5923, June 2006)

Audit Log Reference Guide 101
Set Fibre Topology Operation
[LUMN]
Logical Unit Number Manager function
Set Fibre Topology
Set Fibre Topology operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in Table 61.
Table 61 Detailed Information for Set Fibre Topology Operation
30 B5 (29) 62 75 (61) 94 45 (93) 126 01(125)
31 B4 (30) 63 74 (62) 95 43 (94) -- --
32 B3 (31) 64 73 (63) 96 3C (95) -- --
* Addresses outside parentheses = arbitrated-loop physical address (AL-PA). Addresses in
parentheses= loop IDs.
Value Address* Value Address* Value Address* Value Address*
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[LUNM],Set Fibre
Topology,,Normal end,Seq.=xxxxx
+{Port,Fabric,Connection}=[{XX,ON,FC-AL},{XX,OFF,FC-AL},{XX,ON,P-to-P},{XX,
OFF,P-to-P}],
Num. of Ports=4
Item Description
Port The name of the port where the topology of Fibre Channel is changed.
Fabric Indicates whether the Fabric switch is enabled or disabled.
ON: Enable, OFF: Disable
Connection The connecting mode of the Fabric switch selected.
FC-AL: FC-AL is selected, P-to-P: P-to-P is selected
Num. of Ports The number of ports where the topology of Fibre Channel is changed.