HP StorageWorks Hardware Providers for VDS/VSS installation guide (T1634-96096, April 2010)

Figure 7 Mirrorclone-Snapshot tab settings window
.
Configuring mirrorclones
The Mirrorclone tab in the Settings window enables you to select a disk group and modify the
mirrorclone properties.
You can:
• Select the redundancy level from the Select redundancy type for Mirrorclone vdisk list:
• Default – Same as source
• Vraid0 – No redundancy
• Vraid1 – Mirroring
• Vraid5 – Data plus parity
• Vraid6 – Double parity disks
• Select the mirrorclone deletion mode:
• Sync – Unpresents the mirrorclone from the local host and resets the Mirrorclone pair status to
resync state
• Delete – Deletes the mirrorclone
HP StorageWorks Hardware Providers VDS/VSS installation guide 21