P9000 Volume Shredder for Open and Mainframe Systems User Guide (AV400-96405, October 2011)

5. Check statuses of Result on the Shredding Data pattern field.
Check the contents to verify whether all the overwriting operations have ended normally. The
Shredding Data pattern field shows Normal when an overwriting operation ends normally.
If any overwriting operation ends abnormally, the shredding operation fails. If the shredding
operation fails, retry the shredding operation. If the shredding operation still fails despite
retrying, call HP Technical Support to identify the cause of the failure.
The shredding operation ends if the power supply turns off while the shredding operation is
being performed. In that case, depending on the situation of the performing shredding
operation, either the Shredding operation canceled or Shredding operation Failed message
is displayed.
MeaningStatus
The task is not performed.-
The shredding operation was ended normally.Shredding operation Normal.
The shredding operation is being performed.Writing.
The shredding operation was not performed according to the specified
parameters.
Shredding operation not executed.
The shredding operation was cancelled.Shredding operation canceled.
The shredding operation was ended abnormally.Shredding operation Failed.
The result of the shredding operation could not be output to a file.Shredding data transfer error.
An error was detected while verifying the file containing the result of the
shredding operation.
Shredding data verify error.
When you execute a shredding operation on an unused Thin Provisioning
virtual volume and open the file that contains the result of the shredding
No-data assigned.
operation, this file will contain the text No-data assigned. In this case, no
dummy data will be written to the unused Thin Provisioning virtual volume.
10 Performing Volume Shredder operations